General information The fresh air for the air conditioning in the vehicle interior enters through the dust and pollen filter, and the air flow is determined by the fan speed of...
Air nozzles The air supply nozzle is fixed with four steel spring clips in the instrument panel hole. The following is a description of how to remove the air inlet nozzle...
Air conditioner control panel The illumination of the control buttons is carried out by LEDs, which cannot be replaced. Withdrawal Before removing the panel, recall from memory the errors...
Heating switches Withdrawal Remove the air conditioner control panel. Pull out tabs A (pic. 13.10) and remove the heating switch B from the air conditioning control panel....
Heater fan Withdrawal Remove the glove box. Disconnect electrical connector A (pic. 13.11). Unscrew screws B (pic. 13.11). Moving fan C (pic. 13.11) heater in the...
Intake air temperature sensor Withdrawal Remove the lower instrument panel trim on the driver's side. Disconnect electrical connector A (pic. 13.12). Rotate sensor B (pic. 13.12)...
Executive motor of the heater flap Withdrawal Remove the glove box. Disconnect connector A (pic. 13.13). Unscrew the three screws B (pic. 13.13). Separate the guide lever and remove the engine...
A/C compressor bracket The A/C compressor bracket can be removed without opening the refrigerant circuit. Withdrawal Remove the lower mudguard of the engine compartment. Move the...