The rear suspension of the Audi A6 is dependent and consists of trailing arms connected by a cross member. A lateral link is used to adjust the lateral movement of the suspension. Here are the instructions for repairing the rear suspension.
Rear wheel hub Models with rear drum brakes The hub is part of the brake drum. See subsection 10.10 . Models with rear disc brakes Withdrawal 1. Remove the brake disc. 2....
Rear wheel bearings Replacement 1. Remove the brake drum or hub, depending on the model. 2. Remove the seal from the back of the hub. 3. Remove the inner bearing. Knock out the...
Rear wheel trunnion Withdrawal Models with rear drum brakes 1. Remove the corresponding wheel. 2. Remove the brake drum. 3. Disconnect the brake pipe from the wheel cylinder. 4....
Rear suspension strut Withdrawal 1. Remove the corresponding wheel. 2. Disconnect the hydraulic tube from the suspension strut, if necessary. 3. Install a jack under the rear axle....
Transverse thrust of the rear suspension Withdrawal 1. Install a jack under the rear axle. 2. Unscrew the fastening nuts of the rod, including the nut 1, which also fastens the anti-roll bar 2. 3....
Stabilizer bar of the rear suspension Withdrawal 1. Install a jack under the rear axle. 2. Loosen the mounting nuts, remove the mounting bolts from the anti-roll bar on the left and right sides and...
Rear suspension cross member Withdrawal 1. Remove the fuel tank guard and disconnect the handbrake cables. 2. Disconnect the brake pipes and remove the cables, wires and brake pipes from...
Rear suspension height adjustment system This system serves to maintain a constant rear suspension height regardless of vehicle load. It consists of modified rear shock absorbers, accumulators,...