Models with rear drum brakes
The hub is part of the brake drum. See subsection 10.10.
Models with rear disc brakes
Withdrawal
1. Remove the brake disc.
2. Remove the cap from the center of the hub.
3. Remove the pin and lock cap.
4. Loosen the fixing nut.
5. Remove the washer and outer bearing from the hub.
6. Remove the hub.
Installation
Installation is carried out in the reverse order of removal.
1. Tighten the hub mounting nut just enough so that the washer can be easily moved with a screwdriver.
2. Install the retaining cap and a new pin to secure the nut.
3. Install the protective cap.
Visitor comments