Rear inner wheel arch trim (Audi A2)

1. Rear wheel arch trim. Remove the rear seat. Disconnect the seat belt from trim "1". Disconnect the clamps "4" (2x). Pull the trim "1" out from under the trim of the "B" pillar in position "A". Unhook the clamps "2". Remove the clamp "3" from the retainers. Remove the mounting bracket "6" (2x) from the clamps "7". Remove the clamp "5" from the retainers
2. Fastening
3. Clamps
4. Clamps (2x)
5. Clamps
6. Fastening angle
7. Clamp
8. Lower trim of B-pillar