Table of contents: Removal ↓ Installation ↓
Removal
1. Release the retaining clip and remove the trim panel.
2. Unscrew the mounting bolts (arrows) and remove the handle.
3. Remove the window handle if necessary.
Front doors
1. Remove the window switch and the rearview mirror adjustment knob or adjustment panel. On models with electric rearview mirror adjustment, remove the trim panel in front of the knob.
2. Remove the handle from the door and disconnect the connection connector.
3. Release the retaining clip and remove the handle.
4. Remove the mounting screws along the edges of the trim panel and in the door handle hole.
5. Lift the trim panel up to release the fasteners and remove the panel, disconnect the speaker connection connector.
Rear doors
1. Remove the door handle and remove the window switch.
2. Remove the retaining clip (arrow) and remove the handle.
3. Remove the mounting screws and remove the trim panel.
Installation
1. Installation is carried out in the reverse order of removal.
2. When installing, check that the rubber mounts (arrow) are correctly installed.
3. Check that the wiring is routed correctly.