Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the side cover near the instrument panel using a plastic wedge or screwdriver.
2. Disconnect the spacer (4) at the two spring clamps (5) and remove from the A-pillar.
3. Disconnect the cover (1) by the spring clip (2).
4. Remove the hook (6) from the holder (3) and remove the cover.
Installation
1. Installation is performed in the reverse order of removal. In doing so, pull the door seal over the trim.
[The original article is available on the online resource: AUDIMANUAL.ru]