Manual transmission (KP) Torque from the engine through the clutch is supplied to the input shaft of the gearbox. There are six gears on this input or drive shaft (including reverse...
Noises in the gearbox Over time, the appearance of noise in the CP is possible. In this case, you must first check the oil level in the gearbox. If a howling sound occurs when...
Automatic transmission (AKP) The automatic transmission of the Audi-100 is controlled electronically/hydraulically. Along with four gears, this gearbox is also equipped with two shift...
Electronic automatic transmission control Input signals The control unit processes signals from various nodes; information comes from: Automatic transmission selector lever with multifunction switch....
Main gear The gearbox and main gear are located in the Audi-100, like almost all front-wheel drive cars, in one common housing. Torque from the engine enters the final...
Drive shafts So that when driving and driving you do not feel any influence of a change in the mode of movement on control, the joints of the drive shafts must transmit...
Checking the cuffs of the drive shafts MOT No. 22 The drive shaft joints are protected by rubber cuffs (anthers) from moisture and dirt. Therefore, it is necessary to regularly check these cuffs for...
List of drive shaft faults Drive shafts Usually there are no problems with the drive shafts. Their service life, of course, depends on driving style. Sharp starts with the front wheels...