Lubrication system — specifications All models have a pressure lubrication system. Under vacuum, the oil is sucked in through the strainer of the oil receiver from the oil sump and pumped by the...
Cooling system — specifications The engine uses a liquid cooling system with forced circulation. The cooling system includes cooling jackets. radiator, expansion tank, centrifugal pump,...
Lubrication System Parts Lubrication system details: 1 - intermediate shaft; 2 - oil pump housing; 3 - oil pump drive shaft with drive gear; 4 - driven gear of the oil pump; 5 - oil...
Removal and installation of the oil pump Removing the oil pump The oil pump can be removed directly on the vehicle. Drain the oil from the engine crankcase. Remove the lower clutch housing cover....
Disassembly, inspection and assembly of the oil pump Remove the two bolts securing the oil pump cover to the housing. Separate the cover from the body. Remove the drive shaft and oil pump drive gear. Wash the...
Checking the oil pressure in the lubrication system Disconnect the wires from the engine oil pressure sensor, remove the sensor and screw in the control pressure gauge hose fitting instead. Start the engine and...
Parts of the cooling system Cooling system details: 1 - radiator; 2 - coolant pump; 3 - expansion tank; 4 - junction box with temperature sensors; 5 - sensor for turning on the electric...
Coolant replacement Remove the expansion tank cap. Disconnect the radiator inlet hose from the thermostat housing. Location of thermostat housing 1 Check up reliability of...
Alternator Drive Belt Tension Adjustment Loosen the bolts securing the bracket and the alternator tension bar. Press the alternator away from the cylinder block and tighten the bolt securing the...