Fuel system specifications Main characteristics The firing order of the cylinders is 1-2-4-5-3 Maximum engine speed: NC, DE - 5100±50 rpm CN - 5400±50 rpm 3D - 4800±50 rpm 1T - 5200±50...
General description and precautions General description The fuel system includes a fuel tank, a high pressure fuel pump, a fuel filter with a water separator installed in the engine compartment,...
Air filter assembly — removal and installation Withdrawal 1. Disconnect the plastic duct from the inlet and intermediate ducts on the air filter. 2. Loosen the clamp and disconnect the intake air hose. 3....
Fuel level sensor — removal and installation Note: When working on fuel system components, observe the precautions given in Chapter 1 . Withdrawal 1. The sensor is mounted on top of the fuel tank and is...
Fuel tank — removal and installation Note: Observe the precautions given in Chapter 1 . Withdrawal 1. Drain as much fuel as possible before removing the tank. 2. Disconnect the negative cable from...
Fuel cut-off valve — removal and installation Note: Observe the precautions given in Chapter 1 . Withdrawal 1. The fuel shut-off valve is located on top of the distributor head on the high pressure fuel...
Intake manifold — removal and installation Withdrawal 1. Remove the caps and nuts securing the engine top cover, then remove the cover. 2. Remove the air filter assembly as described in Chapter 2 . 3....