Car rear suspension Audi 100 C3, petrol
Detailed technical specifications of the rear suspension
The rear suspension is independent, lever-type with an elastic connecting crossmember, with longitudinal levers welded to the crossmember, with double-acting...
The rear suspension is independent, lever-type with an elastic connecting crossmember, with longitudinal levers welded to the crossmember, with double-acting...
Tightening torques for main threaded connections
Tightening torques of main threaded connections, kgf·m Upper end shock absorber mounting nut: 2.0. Upper support mounting nut: 3.5. Lower end shock absorber...
Tightening torques of main threaded connections, kgf·m Upper end shock absorber mounting nut: 2.0. Upper support mounting nut: 3.5. Lower end shock absorber...
Rear suspension parts
Rear suspension details: 1 - rear suspension beam; 2 - wheel hub; 3 - hub bearing; 4 - Panhard rod; 5 - anti-roll bar; 6 - suspension spring; 7 - buffer; 8 -...
Rear suspension details: 1 - rear suspension beam; 2 - wheel hub; 3 - hub bearing; 4 - Panhard rod; 5 - anti-roll bar; 6 - suspension spring; 7 - buffer; 8 -...
Removal and installation of the rear suspension unit (shock absorber assembly with spring)
Remove the right or left rear wheel. Raise the rear of the vehicle using a jack stand. Unscrew bolt 1 (see photo) securing the lower end of the shock absorber....
Remove the right or left rear wheel. Raise the rear of the vehicle using a jack stand. Unscrew bolt 1 (see photo) securing the lower end of the shock absorber....
Disassembly and assembly of the suspension unit
Disassembly Remove the suspension assembly as described above. Compress the rear suspension spring using tool 1403. Loosen the shock absorber rod nut. Remove...
Disassembly Remove the suspension assembly as described above. Compress the rear suspension spring using tool 1403. Loosen the shock absorber rod nut. Remove...
Removal and installation the rear suspension
Remove the rear wheels. Disconnect the parking brake cables from the rear wheel brakes. On vehicles with fuel injected engines, remove the fuel tank bracket...
Remove the rear wheels. Disconnect the parking brake cables from the rear wheel brakes. On vehicles with fuel injected engines, remove the fuel tank bracket...
Body position regulator
Checking the performance of the power steering pump of the body position regulator (body position regulator circuit). Details of the height adjustment system:...
Checking the performance of the power steering pump of the body position regulator (body position regulator circuit). Details of the height adjustment system:...
Adjusting the control valve drive rods
Note: This adjustment requires the use of two wooden supports - 50x50x309 mm blocks. Place the stands under the vehicle as shown in the figure. Place a load...
Note: This adjustment requires the use of two wooden supports - 50x50x309 mm blocks. Place the stands under the vehicle as shown in the figure. Place a load...
Checking pressure accumulators
Warning: Before checking the pressure accumulators, relieve the pressure in the body position regulator system by unscrewing the distributor bleeder nipple....
Warning: Before checking the pressure accumulators, relieve the pressure in the body position regulator system by unscrewing the distributor bleeder nipple....
Removal and installation rear wheel hubs
Cars with rear drum brakes Remove the wheel from the desired side. Remove the cap, cotter pin 1 (see photo) and remove the toothed stopper 2. Removal the rear...
Cars with rear drum brakes Remove the wheel from the desired side. Remove the cap, cotter pin 1 (see photo) and remove the toothed stopper 2. Removal the rear...
Replacing hub bearings
Remove the inner races of the tapered roller bearings. Press out the outer rings using a copper mandrel. Press in a new outer bearing outer race using the VW...
Remove the inner races of the tapered roller bearings. Press out the outer rings using a copper mandrel. Press in a new outer bearing outer race using the VW...
Adjusting the clearance in the rear wheel hub bearings
Remove the rear wheel from the desired side of the vehicle. Remove the cap, cotter pin and toothed stop. Adjust the clearance in the hub bearings by firmly...
Remove the rear wheel from the desired side of the vehicle. Remove the cap, cotter pin and toothed stop. Adjust the clearance in the hub bearings by firmly...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections of other Audi car models:
Chassis: Rear suspension Audi 80 B2 (1979-1986)
Chassis: Rear suspension Audi A3 Type 8L (1996-2003)
Chassis: Rear suspension Audi A4 B7 (2004-2008)
Chassis: Rear suspension Audi A6 C4 (1994-1997)
Chassis: Rear suspension Audi Q5 Type 8R (2008-2017)
Chassis: Rear suspension Audi 80 B2 (1979-1986)
Chassis: Rear suspension Audi A3 Type 8L (1996-2003)
Chassis: Rear suspension Audi A4 B7 (2004-2008)
Chassis: Rear suspension Audi A6 C4 (1994-1997)
Chassis: Rear suspension Audi Q5 Type 8R (2008-2017)
Share information:
- General information
- User manual
- Power unit
- Engine repair
- Ignition system
- Fuel system (gasoline)
- Fuel system (diesel)
- Lubrication system
- Cooling system
- Exhaust system
- Transmission
- Clutch
- Car gearbox
- Drive shafts
- Chassis
- Car suspension
- Steering
- Wheels and tires
- Brake system
- Body
- Ventilation and heating
- Body repair
- Electrical equipment
- Power devices
- Lighting and appliances
- Electrical circuits
- General information
- Operation and maintenance
- Power unit
- Engine repair
- Exhaust system
- Cooling system
- Supply system
- Air filter
- Mono-Motronic injection system
- Digifant injection system
- KE-III-Jetronic and KE-Motronic
- MPI and MPFI injection system
- Transmission
- Clutch
- Car gearbox
- Chassis
- Suspension and steering
- Brake system
- Wheels and tires
- Body
- Exterior
- Interior
- Electrical equipment
- Fuses and relays
- Power devices
- Ignition system
- Lighting and signaling
- Equipment and devices
- Electrical circuits
- General information
- User manual
- Maintenance
- Specifications
- Power unit
- Engines 4-cylinder
- Engines 5-cylinder
- Diesel engine
- Cooling system
- Power system (carburetor)
- Power system (injector)
- Fuel system (diesel)
- Transistor ignition system
- Electronic ignition system
- Transmission
- Clutch
- 4 speed gearbox 014
- 5 speed gearbox 013 and 093
- 5 speed gearbox 016 and 012
- Shift mechanism KP 016
- Automatic transmission
- Front wheel drive
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Body elements
- Electrical equipment
- Lighting and appliances
- Power devices
- Electrical circuits
- General information
- Maintenance and operation
- 4 cylinder engine
- Engine repair
- Cooling and lubrication system
- Supply system
- Ignition system
- 5 cylinder engine
- Engine repair
- Cooling and lubrication system
- Supply system
- Ignition system
- Transmission
- Clutch and drive shafts
- 4 speed gearbox 014
- 5 speed gearbox 013 and 093
- 5 speed gearbox 016 and 012
- Automatic gearbox
- Chassis
- Steering
- Front suspension
- Rear suspension
- Brake system
- Body
- Body elements
- Doors, locks and windows
- Body repair
- Electrical equipment
- Equipment and devices
- Power devices
- Electrical circuits
- General information
- User manual
- Maintenance
- Troubleshooting
- Power unit
- Engine in a car
- Engine removed
- Cooling system
- Fuel system
- Exhaust system
- Starting and charging
- Preheating
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Brake system
- Suspension
- Steering
- Body
- Exterior
- Interior
- Electrical equipment
- Equipment and devices
- Electrical circuits