Device for straightening deformed car body elements It consists of a beam (10) and a hinged swinging power arm (1), hydraulic cylinder (3), manual hydraulic pump (12), stop (5), power cross (6) and a set of...
Device for straightening deformed bodies A device for straightening deformed bodies in conjunction with an installation designed to control and repair the body According to the principle of action is...
Straightening hammers They are distinguished by a significant variety in mass, shape of the working part and the materials from which they are made. The working part of...
Tippers Needed to turn the vehicle into a position that allows for easy service from the bottom. The tippers are made according to different design schemes, but they...
General description of body parts The Audi body has a load-bearing structure. The bottom, sides, roof and rear fenders are welded together. Major damage to the body can only be repaired in a...
Front bumper and grille Front bumper A bumper assembly B Outside temperature sensor 1 bumper 2 Strength element 3 Insert 4 Molding 5 Shock absorber 6 Molding 7 Support bracket 8 Air...
Front fender Installation elements 1 Front fender 2 Side cover 3 Seal 4 Front mounting bracket 5 Retainer 6 Side pin 7 Locker 8 Locker latch 9 Inner nut 10 Rear panel...
Hood Bonnet fittings 1 Hood 2 Hood lock cable 3 Bottom rack mount 4 Gasket 5 Rack 6 Top rack mount 7 Stopper 8 Front gasket 9 Tip 10 Mounting support 11 Bracket 12...
Doors Exterior door elements 1 door 2 Seal 3 Side molding 4 Lower molding 5 Lid 6 Mirror glass 7 Mirror tilt adjustment 8 Rear view mirror 9 plate Internal elements...
Trunk lid and rear bumper Trunk lid elements 1 trunk lid 2 Seal 3 Drummer 4 Stop 5 Electric lock 6 Stopper 7 Rack 8 Loop 9 Decorative cover 10 Electric lock stopper 11 stem 12 Clamp 13...