Installation for monitoring the basic points of the body floor specified by the manufacturer, and when working simultaneously with a device equipped with clamping devices for straightening and monitoring particularly complex body repairs
1, 2, 3, 4, 5, 6 Removable brackets
7 Frame
8 Stands with clamping devices
9 Eccentric shafts
10 Adjusting screws
11 Straightening device
The installation is a mobile frame structure welded from an I-beam and a #20 channel. A conductor is mounted on the upper surface of the frame, which is removable brackets (1-6) that copy the base points of the geometric parameters of the body floor specified by the manufacturer. The coincidence of the holes of the support brackets with the corresponding base points of the body bottom indicates the correct geometric arrangement of the attachment points of the vehicle chassis units.
On the side surfaces of the frame (7) are mounted adjustable height and tilt posts (8) with clamping devices designed for fastening the body by the thresholds on the stand.
The original article is located on the online resource: AUDIMANUAL