Detailed specifications of the front suspension Front suspension - independent type «rocking candle» with hydraulic shock absorber struts, helical coil springs, lower wishbones and an anti-roll bar that acts...
Tightening torques for main threaded connections Tightening torques of the main threaded connections, kgf·m Nut for fastening the telescopic strut rod to the upper support 6.0. Suspension arm to subframe nut:...
Front suspension parts Front suspension details: 1 - shock absorber; 2 - suspension spring; 3 - round nut; 4 - protective cap of the nut; 5 - compression stroke buffer; 6 -...
Removal and installation of a telescopic rack Withdrawal Place the vehicle on a lift or a pit and apply the parking brake. Loosen the front wheel bolts and remove the wheel hub nut. Raise the front of the...
Disassembly and assembly of the telescopic pole Disassembly and assembly of the telescopic strut are made to replace the shock absorber or suspension spring. Disassembly Remove the telescopic pole as...
Removal and installation of the stabilizer bar Loosen the self-locking nuts securing the ends of the stabilizer bar to the suspension arms. Detach the stabilizer bar from the subframe. Remove the stabilizer...
Adjustment of a convergence of forward wheels Set the steering wheel to the straight ahead position. Lock the steering wheel in this position with the lock or tool 3076. Divide the nominal toe angle in...
Front camber adjustment The camber angle is adjusted by moving the telescopic struts in the oval holes of the upper supports. Remove the protective cap of the telescopic pole. Loosen...
Disassembly and assembly of the front wheel hub Remove the telescopic pole from the desired side as described above. Remove the protective cover. Press the wheel hub out of the steering knuckle using a...
Front wheel alignment Measurements are taken using special tools after removing the corresponding wheel. Install the car on a lift, inspect and, if necessary, check suspicious...