Disassembly and assembly of the input shaft Gearbox input shaft type 014 1 - needle bearing; 2 - retaining ring; 3 - adjusting washer; 4 - gear wheel of the 4th gear; 5 - 4th gear needle bearing; 6 - 4th...
Assembly and disassembly of the synchronizer Order of execution 1. Remove the blocking rings from the synchronizer. 2. Mark the position of the coupling in relation to the hub. 3. Remove the springs and...
Dismantling and assembly of a secondary shaft Type 014 transmission output shaft 1 - nut; 2 - inner ring of the 1st row of the bearing; 3 - the outer ring of the bearing; 4 - adjusting washers; 5 -...
Disassembly and assembly of the differential Differential 1 - bolt; 2 - spring washer; 3 - differential box; 4 - separator; 5 - side gear; 6 - satellite gear; 7 - nut; 8 - axis; 9 - driven gear; 10 -...
Gearbox Assembly Order of execution 1. Install the output shaft front bearing outer race into the clutch housing (if the bearing was replaced) and fix it with pin 22 (see fig....