Table of contents: Removal ↓ Installation ↓
Removal
1. Disconnect the plastic air duct from the inlet and intermediate air ducts on the air filter.
2. Loosen the clamp and disconnect the air inlet hose.
3. Bend back the retaining clips and lift the top cover off the air filter housing.
4. Remove the air filter element.
5. Loosen the mounting bolt and remove the air filter housing (see illustrations). If necessary, remove the rubber pads from the housing. Check the condition of the fasteners and replace them if necessary.
Installation
6. Installation is carried out in reverse order.
A link to the original source is available on the website: AUDIMANUAL