Before starting this procedure, gather together all the necessary tools and materials. It is necessary that the engine be warm so that the oil drains better along with the bulk of the contaminants.
The engine compartment of a car with a 1.8-I / 150 hp engine. (without casing)
1 - battery,
2 - accelerator cable,
3 - brake booster,
4 - brake fluid reservoir,
5 - expansion tank,
6 - electronic unit,
7 - a reservoir with liquid for windshield washer
8 - a reservoir with liquid for the amplifier
9 - hydraulic block of the anti-lock braking system,
10 - generator,
11 - dipstick for measuring the oil level,
12 - oil filler cap,
13 - ignition coil,
14 - air filter housing.
15 - air flow meter,
16 - pollen filter
The engine compartment of a car with a 2.4-I / 164 hp engine. (without casing)
1 - battery,
2 - fuel pressure regulator,
3 - brake booster,
4 - brake fluid reservoir,
5 - expansion tank,
6 - electronic unit,
7 - a reservoir with fluid for windshield washer,
8 - hydraulic block of anti-blocking brake system,
9 - power steering fluid reservoir,
10 - oil filler cap,
11 - suction pipeline,
12 - ignition coil,
13 - dipstick for measuring the oil level,
14 - air filter housing,
15 - air flow meter,
16 - pollen filter.
The engine compartment of a car with a 1.9 TDI / 110 hp engine. (without casing)
1 - battery,
2 - brake booster,
3 - brake fluid reservoir,
4 - expansion tank,
5 - electronic unit,
6 - a reservoir with liquid for windshield washer,
7 - hydraulic block of the anti-lock braking system,
8 - power steering fluid reservoir,
9 - generator,
10 - dipstick for measuring the oil level,
11 - fuel pump,
12 - nozzle,
13 - oil filler cap,
14 - turbocharger,
15 - air filter housing,
16 - pollen filter.
When changing the oil, do not change from one type of oil to another, as this will adversely affect the durability of the engine. Engine oils of different brands should not be mixed if possible. Engine oils of the same type and brand, but of different viscosities, can be added to the engine if necessary.
Required wearing parts and materials
- After draining the oil, a new O-ring must be used when installing the drain plug (copper or aluminum), which can be supplied with an oil filter.
- Oil filter. The 2.5-I-TDI engine requires a filter element and two O-rings for the oil filter cap.
- Depending on the engine, 3.5 to 7.0 liters of engine oil.
Visitor comments