Table of contents: Removal the oil pump ↓ Installing an oil pump ↓
Removal the oil pump
The oil pump can be removed directly from the vehicle.
Drain the oil from the engine crankcase.
Remove the lower clutch housing cover.
Place a jack under the front subframe.
Remove the front subframe mounting bolts.
Lower the jack slightly.
Remove the oil pan.
Loosen the bolts securing the oil pump to the cylinder block.
Remove the oil pump.
Installing an oil pump
Install the oil pump onto the cylinder block so that the drive tab engages correctly with the drive shaft.
Tighten the bolts securing the oil pump to the cylinder block.
Install the front subframe.
Install the lower clutch housing cover.
Fill the lubrication system with engine oil.
(The text is based on materials from the website: AUDIMANUAL.ru)