Fig. 3.3–21. Location of the power steering pump poly V-belt pulley mounting bolts and a special tool to prevent the pulley from turning
Unscrew the bolts securing the power steering pump poly V-belt pulley, holding the pulley from turning with a special tool (Fig. 3.3–21).
When installing the pulley, the "front" label must face the front of the engine.
Fig. 3.3–19. Location and numbering of bolts for fastening the manual gearbox to the engine: A – location of installation of the centering sleeve
| Position | Bolt | Tightening torque, Nm |
| 1 | M12x80 | 65 |
| 2 | M12x90 | 65 |
| 3 | M10x50 | 45 |
| 4 | M10x45 | 45 |
| 5 | M10x135 | 65 |
| 6 | M12x110 | 65 |
| 7 | M12x67 | 65 |
Fig. 3.3–20. Location and numbering of bolts for fastening the automatic transmission to the engine: A, B – locations of installation of centering bushings
| Position | Bolt | Tightening torque, Nm |
| 1 | M12x80 | 65 |
| 2 | M12x90 | 65 |
| 3 | M10x60 | 45 |
| 4 | M10x45 | 45 |
| 5 | M10x80 | 65 |
| 6 | M12x110 | 65 |
| 6 | M12x67 | 65 |