Front suspension The suspension is the link between the body and the wheels. Through it, the forces acting on the wheels are transmitted to the body. The suspension serves to...
Shock absorber strut Withdrawal Loosen the front wheel bolts, then raise the front of the vehicle and secure it on stands. Remove the front wheel. Using a screwdriver blade as a...
Disassembly and assembly of the shock absorber strut Disassembly Pic. 12–5. Shock absorber elements: 1 - nut with collar, 50 Nm; 2 - spacer sleeve; 3 – the top support of a shock-absorber rack; 4 - washer; 5 -...
Rounded fist Withdrawal Using the blade of a screwdriver as a lever, remove the cap from the center of the wheel rim. With the vehicle on wheels, loosen the bolts securing...
Lower front frame Withdrawal Hook the load handlers onto the engine and lift just enough so that the weight of the engine is supported by the load handler. Using the blade of a...
Front stabilizer bar Withdrawal Pic. 3.1–1. The location of the fastening latches of the lower mudguard of the engine compartment Release the clips and remove the lower mudguard of...
Rear suspension The independent rear suspension is fully assembled on the rear frame and includes levers: the upper transverse, on which the lower end of the shock absorber is...
Rear shock absorber Withdrawal Remove the rear wheel. Pic. 12–18. Using a special tool VAG 1752/1 to compress the rear suspension springs Using the VAG 1752/1 spring compression...
Shock absorber check Typical signs that indicate a malfunction of the shock absorber are: prolonged rocking of the body when driving on uneven road surfaces; increasing body sway...
Rear suspension wishbone Withdrawal Remove the rear wheel. Pic. 12–18. Using a special tool VAG 1752/1 to compress the rear suspension springs Using the VAG 1752/1 spring compression...
Rear lower frame Withdrawal The lower rear frame is removed along with the main reverse gear, steering knuckle and rear suspension arms. Using the blade of a screwdriver as a...