Car driveline Audi A8 D2

General information about all-wheel drive
To drive the rear wheels, the vehicle is additionally equipped with a transfer case, cardan shaft , the main rear gear and the rear drive shafts. To equalize...

Removal and installation the propeller shaft
Removal If present, unscrew the four bolts and remove the cross member located under the exhaust pipes. Unscrew the nuts securing the exhaust pipe connecting...

Adjusting the position of the cardan shaft
Adjusting the position of the intermediate support of the cardan shaft If equipped, remove the four bolts and crossbar located below the exhaust pipes. Unscrew...

Main reverse gear
Removal If present, unscrew the four bolts and remove the cross member located under the exhaust pipes. Unscrew the nuts securing the exhaust pipe connecting...

Rear drive shafts
Removal Using a screwdriver blade as a lever, remove the cap from the center of the wheel rim. With the vehicle standing on its wheels, loosen the bolts...

Rear main gear differential
Removal Remove the final drive. Fig. 11–13. Differential of the main rear gear: 1 – breathers; 2 – main reverse gear housing; 3 – outer ring of tapered roller...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: