Air Conditioner Control Panel (Audi 100 C3)

Air Conditioner Control Panel

1 – HI – button for switching off the maximum rotation speed of the fan blades. When you press the button, the fan turns on at maximum rotation speed, when you press it again, it turns off;

2 – LO – button for switching off the minimum rotation speed of the fan blades. When you press the button, the fan turns on at maximum rotation speed, when you press it again, it turns off;

3 –

– windshield defroster button. When you press the button, the entire air flow is directed to the windshield and side windows. This function is designed to defrost and defog the windows and is turned off by pressing it again;

4 – AUTO – button for switching on the automatic temperature maintenance mode. When the button is pressed and the driver selects a temperature within the range of +18 to +29°C, the air conditioner automatically maintains the set temperature. The light above the button lights up. When pressed again, this function is disabled;

5 – BI-LEV – air distribution switch button. When you press this button, the main air flow goes through the air blowers on the instrument panel and to the feet of the driver and passengers. A small amount of air goes through the windshield and side window blower nozzles. When you press it again, this function is turned off;

6 – ECON – button for economical operation of the air conditioner. When you press the button, the air conditioner compressor is turned off and either air from the street or heated air can enter the passenger compartment. This mode should be used in cases where there is no need to cool the air or to save fuel. When you press the button again, the compressor turns on;

7 – OFF – air conditioner switch button. When you press the button, the air conditioner turns off and no air enters the cabin. When you press it again, the air conditioner turns on. This mode should be used when driving through dusty road sections, etc. It is not recommended to drive in this mode for too long;

8 – WARMER and COOLER – temperature setting buttons. When you press the WARMER button, the set temperature increases, when you press the COOLER button, it decreases;

9 – air conditioner display;

10 – OUTSIDE TEMP – button for turning on the outside thermometer. When you press the button, the outside air temperature is shown on the display. At the same time, the control lamp to the left of the switch lights up. At low speeds or when the car is stationary with the engine running, the data may not correspond to reality. When you press it again, this function is disabled;

11 – CF – temperature unit switch. In position C, the temperature on the display is shown in degrees Celsius, and in position F – in degrees Fahrenheit