Anti-roll bar — removal and installation (Audi 100 C3)

1. If the anti-roll bar is distorted or damaged, it must be replaced with a new one.

2. Remove the two bolts from each of the two hangers that secure the anti-roll bar to the subframe and remove the hangers (photo).



3. Unscrew the nut and remove the gasket from each end of the stabilizer (photo).



4. By rocking the front suspension strut up and down with the car standing on its wheels, remove the stabilizer from the bushings on the arms.

5. Installation is carried out in the reverse order. The front suspension must be rocked up and down when installing the stabilizer into the bushings of the levers. Tighten the installation with the tightening torque specified in Specifications.