Order of execution
1. Disconnect wire from «negative» battery terminals.
2. Drain the remaining fuel from the tank.
3. Disconnect from sensor (see fig. 1.8L Engine Power System) hoses and wires (cm. pp. 2–4 subsections 6.1.9.).
4. Disconnect the pipe and hose from the filler neck.
5. Open the fuel tank filler cap and loosen the filler cap screw. Loosen the clamp, remove the filler pipe.
6. Raise and support the rear of the vehicle.
7. Disconnect the fuel tank clamps and lower the tank.
8. Install the fuel tank in reverse order.
Visitor comments