Order of execution
1. Disconnect the cable from the carburetor throttle lever.
2. Install the accelerator pedal so that the distance from the pedal to the stop on the floor is 60 mm.
3. Set throttle lever to idle position (throttle valves closed) and attach a cable to it.
4. Tighten the cable and insert the stop bracket into the groove closest to the bracket on the cable adjusting tip.
5. You can check the adjustment by depressing the accelerator pedal all the way. In this case, the distance between the throttle actuator lever and the stop should be no more than 1 mm.
Visitor comments