Execution order
1. Connect the test pressure gauge hoses to the fuel pump and carburetor.
2. Start the engine and check the pressure using the control pressure gauge. It should be within 0.02–0.025 MPa (0.2–0.25 kgf/cm²).
The fuel pressure at the outlet of the fuel pump is not regulated. If the pressure drops below the norm, the fuel pump is replaced.
1. Connect the test pressure gauge hoses to the fuel pump and carburetor.
2. Start the engine and check the pressure using the control pressure gauge. It should be within 0.02–0.025 MPa (0.2–0.25 kgf/cm²).