Fuel tank with a capacity of 20 liters with attachments:
1. Return fuel line from the fuel cooler. Before disconnecting, mark, do not bend. To remove, press the release buttons on the connector
2. Electrical connector of fuel level indicator sensor "G"
3. Bolt, 21 Nm for fastening the fuel tank filler neck and connection to ground
4. Spacer sleeve. First, insert the ground connection into the mounting hole on the fuel tank, then press the spacer sleeve
5. Overflow hose
6. Fuel tank filler cap assembly with rubber cup
7. Sealing cuff (replace if damaged)
3. Lid
9. Bolt, 1.5 Nm
10. Ground connection. Check the strength of the connector fastening on the filler neck ring, first pass the ground connection into the fastening hole on the fuel tank, then press the spacer sleeve. After installation, check the electrical connection of the metal ring on the filler neck with an open point of the body using an ohmmeter, the specified value: about 0 Ohm
11. Fuel tank
12. Fuel supply line to the fuel filter. Before disconnecting, mark, do not bend, to remove, press the release buttons on the connector
13. Bolt, 21 Nm