Fuel tank with a capacity of 34 liters with attachments:
1. Fuel return line from the fuel cooler. Before disconnecting, mark, do not kink, to remove, press the release keys on the connector
2. Electrical connector for fuel gauge sender -G-
3. Bolt. 21 Nm, for attaching the fuel filler neck and earth connection
4. Spacer sleeve, first push the ground connection into the fixing hole on the fuel tank, then press the spacer sleeve
5. Overflow hose
6. Fuel filler cap assembly with rubber cup
7. Sealing collar (replace if damaged)
8. Lid
9. Bolt, 1.5 Nm
10. Ground connection. Make sure that the plug is securely fastened to the filler ring. First push the ground connection through the fixing hole on the fuel tank, then press in the spacer sleeve, after installation, check with an ohmmeter the electrical connection of the metal ring on the filler neck with the open point of the body, specified value: approx. 0 Ω
11. Fuel tank
12. Fuel supply line to the fuel filter. Before disconnecting, mark, do not kink, to remove, press the release keys on the connector
13. Bolt, 21 Nm.
Visitor comments