Fuel tank with a capacity of 42 liters with attachments:
1. Fuel return line from the fuel cooler. Do not bend, fix with clips on the fuel tank
2. Electrical connector for fuel gauge sender -G-
3. Bolt. 21 Nm, for attaching the fuel filler neck and earth connection
4. Spacer. First push the earth connection through the fixing hole on the fuel tank, then press in the spacer sleeve
5. Overflow hose
6. Fuel filler cap assembly with rubber cup
7. Sealing collar (replace if damaged)
8. Lid
9. Bolt, 1.5 Nm
10. Ground connection. Check that the plug on the filler ring is secure, first insert the ground connection into the fixing hole on the fuel tank, then press in the spacer sleeve, after installation check the electrical connection of the metal ring on the filler neck with an open point on the body with an ohmmeter, specification: approx. 0 ohm
11. Fuel tank
12. Fuel supply, line to the fuel filter. Before disconnecting, mark, do not kink, to remove, press the release keys on the connector
13. Bolt, 21 Nm
Visitor comments