Clutch slave cylinder — removal and installation (Audi 100 C3)

1. From underneath the vehicle, remove the tension wire from the slave cylinder and from the hole in the cylindrical mounting pin on top of the transmission.

2. Push out the cylindrical pin, remove the cylinder with the pusher. Move it as far as possible from the installation location.

3. Unscrew the flexible hydraulic line by holding the pipe coupling with a wrench and unscrewing the actuator cylinder from the pipe.

4. Remove the slave cylinder from under the vehicle.

5. Installation is carried out in the reverse order. Bleed the hydraulic system as described in Chapter 11, check the clutch adjustment as described in Chapter 2.