Secondary shaft KP 016
- 1 - secondary shaft;
- 2 - gasket;
- 3 - outer bearing ring;
- 4 - roller bearing;
- 5 - 4th gear pinion;
- 6 - retaining ring;
- 7 - retaining ring;
- 8 - 3rd gear pinion;
- 9 - retaining ring;
- 10 - 2nd gear needle bearing;
- 11 - 2nd gear pinion;
- 12 - synchronizer locking ring;
- 13 - synchronizer;
- 14 - retaining ring;
- 15 - synchronizer locking ring;
- 16 - 1st gear needle bearing;
- 17 - 1st gear pinion;
- 18 - roller bearing;
- 19 - outer bearing ring;
- 20 - adjusting washer;
- 21 - adjusting washer;
- 22 - 5th gear pinion;
- 23 - washer;
- 24 - bolt;
- 25 - spring;
- 26 - coupling;
- 27 - hub;
- 28 - cracker
The sequence of disassembly and assembly of the secondary shaft is similar to the sequence of disassembly and assembly of the secondary shaft of the gearbox type 013 and 093 (cm. subsection 7.4.2.4). When assembling, select a retaining ring 6 of such thickness that the axial clearance between it and gear 5 of the 4th gear does not exceed 0.02 mm. The thickness of retaining ring 7 should be 2.4 mm.