4 cylinder engine
Toothed belt 4-cylinder engine
1 toothed belt
2 Timing belt cover
3 Wire belt.
4 Toothed belt sprocket
5 Crankshaft gear
6 Crankshaft oil seal
7 Intermediate shaft seal
8 Timing shaft gear
Remove toothed belt cover.
While holding the large bolt on the tensioner pulley, loosen the small nut and turn the tensioner clockwise to tighten the belt or counterclockwise to loosen it.
The belt is correctly tensioned if it can be rotated 90°half way between the camshaft and countershaft sprockets.
5 cylinder engine
Remove toothed belt cover.
Loosen the water pump adjusting bolts and turn the pump clockwise to tighten the belt or counterclockwise to loosen. The belt is correctly tensioned if it can be rotated 90°halfway between the camshaft drive sprocket and the water pump.
Visitor comments