Table of contents: Removal ↓ Installation ↓
Removal
Remove the engine hood. Remove the crankshaft poly V-belt pulley.
Remove the lower cover for the toothed belt, to do this, unscrew the bolts "arrows" and open the clamps "1".
Observe the position of the "arrow on the left" pointer of the tension roller and press hard with your thumb on the toothed belt "arrow on the right". The arrow should move to the side. Release the belt. Turn the crankshaft in the direction of engine rotation by 2 turns. Check the position of the tension roller pointer. The pointer should return to its original position. If the pointer is not in its original position, replace the tension roller.
Installation
Installation is in reverse order, in this case it is necessary to install the multi-click belt pulley for the crankshaft.