Toothed belt drive:
1. Bolt. Replace, 12 Nm
2. Lower timing belt cover
3. Bolt
4. Rear timing belt cover
5. Bolt, 10 Nm
6. Bolt, 50 Nm
7. Roller for main drive toothed belt
8. Upper timing belt cover
9. Main drive toothed belt. Check the degree of wear, do not bend, mark the direction of travel with chalk or a felt-tip pen before removing
10. Bolt
I. Intake camshaft
12. Toothed belt for the coupled drive, check the degree of wear, do not bend, before removing mark the direction of travel with chalk or a felt-tip pen
13. Timing Belt Tensioner for Coupled Drive
14. Exhaust camshaft gear
15. Bolt
16. Bolt, 20 Nm
17. Cooling system pump
18. Roller for main drive toothed belt
19. Bolt, 50 Nm
20. The toothed belt gear for the crankshaft on the adjacent surfaces between the toothed belt drive sprocket and the crankshaft should be free of oil, installation is possible only in one position, remove after dismantling the toothed belt for the main drive
21. Tension roller for the main drive toothed belt
22. Bolt, 20 Nm