Table of contents: Removal ↓ Installation ↓
Removal
Remove the engine hood. Remove the poly V-belt.
Disconnect connector "1" of the electromagnetic clutch on the air conditioning compressor. Unscrew the "arrow" bolts of the air conditioning compressor.
Caution! Risk of damage to the cooling system hoses and lines. Do not twist, bend or deform the refrigerant lines and hoses.
Tie the air conditioning compressor with the refrigerant hoses connected to the radiator frame from above. Unscrew the wire for terminal 30/B+ "pos. 1" from the generator, Disconnect connector "2".
Unscrew bolts "1" and "2" of the generator.
Instructions: If the generator is jammed in its bracket, then screw the bolt back in (up to 2 turns). Gently tap the flat end of a hammer on the head of the bolt to loosen the generator mounting bushings.
Remove the generator.
Unscrew the arrow bolts and remove the auxiliary unit bracket.
Installation
Installation is in reverse order, while it is necessary to tighten the bolts of the bracket of additional units. Install the generator. Install the air conditioning compressor.