2.0. Timing gear drive:
1 - bolt for fastening the lower part of the protective cover of the gas distribution mechanism drive. Tightening torque - 10 Nm
2 - bolt for fastening the timing belt tensioner. Tightening torque - 10 Nm
3 - washer
4 - bolt. Tightening torque - 22 Nm
5 - timing belt tensioner lever
6 - sealing ring
7 - a bolt of fastening of a tension roller. Tightening torque - 22 Nm
8 - the central bolt for fastening the camshaft gear. Tightening torque - 55 Nm
9 - washer
10 - mounting plate
11 - camshaft gear on the right cylinder head
12 - compensation washer
13 - bolt for fastening the right side of the rear protective cover of the gas distribution mechanism drive. Tightening torque - 10 Nm
14 - bolt for fastening the left side of the rear protective cover of the gas distribution mechanism drive. Tightening torque - 10 Nm
15 - the right side of the rear protective cover of the gas distribution mechanism drive
16 - water pump mounting bolt. Tightening torque -10 Nm
17 - water pump
18 - sealing gasket. To be replaced after each disassembly
19 - the left side of the rear protective cover of the gas distribution mechanism drive
20 - camshaft gear on the left cylinder head
21 - mounting plate
22 - toothed timing belt
23 - the central bolt of the camshaft gear. Tightening torque - 55 Nm
24 - guide roller
25 - timing gear on the crankshaft
26 - tension roller
27 - bolt for fastening the guide roller. Tightening torque - 43 Nm
28 - the central bolt for fastening the drive gear of the gas distribution mechanism to the crankshaft. Tightening torque: 1st pass - 200 Nm; 2nd pass - tighten 180°
29 - timing belt tensioner
30 - the lower part of the protective cover of the gas distribution mechanism drive
Visitor comments