4.0. Cylinder head:
1 - cylinder head gasket
2 - cylinder head
3 - lifting eye
4 - bolt. Tightening torque - 25 Nm
5 - centering pin
6 - a bolt of fastening of a head of the block of cylinders
7 - intake manifold gasket. To be replaced after each disassembly
8 - intake manifold
9 - intake manifold mounting bolt. Tightening torque -10 Nm
10 - oil filler cap
11 - sealing gasket of the oil filler cap
12 - sealing gasket of the oil filler neck
13 - protective cover of the cylinder head cover
14 - nut for fastening the cylinder head cover. Tightening torque - 10 Nm
15 - cylinder head cover
16 - cylinder head cover gasket
17 - fresh air intake valve to exhaust valves with a connecting pipe
18 - valve mounting bolt. Tightening torque - 10 Nm
19 - valve seal
20 - bolt. Tightening torque - 10 Nm
21 - pipeline of the cooling system
22 - sealing ring. To be replaced after each disassembly
23 - plug on the end side of the cylinder head
Attention! The Motronic fuel injection system provides for the afterburning of unburned particles by supplying fresh air to the exhaust valves by a separate air pump.
Visitor comments