Removal
Sedan version: fold back the luggage compartment mat.
Station wagon version: unlock the middle shelf of the luggage compartment and assemble it.
Unscrew the trim on the sides of the luggage compartment on the left and right. Now the mounting bolts of the bumper become accessible.
All models: unscrew two hex bolts on the right and left in the trunk.
Unscrew two screws on the right and left that connect the bumper and the fender liner.
Separate the sides of the bumper from the body brackets. To do this, press down hard on the bumper from the side and simultaneously pull it from the body by the upper edge
Remove the bumper by lifting it at both ends above the fender liners.
When installing the bumper, insert the rear fasteners first.
First insert the sides of the bumper into the brackets on the body with the lower edge. Then press them from the side at the top so that the upper fastening points are also fixed. Watch the fastening brackets along the lower edge of the bumper.
Lift the mudguards over the ends of the bumper and connect them with bolts.
The bumper height is adjusted by moving the bumper mount.