Limousine
Removal
Remove bumper cover 6 (Fig. 12.5)
Fig. 12.5. Rear bumper
1 - bolt, 23 Nm,
2 - rear bumper,
3 - bumper crossbar,
4 - rear trim for rear shield,
5 - spherical head bolt, 1.5 Nm,
6 - bumper cover,
7 - guide part,
8 - bolt, 1 Nm,
9 - inner wing,
10 - flange nut, 6 Nm,
11 - flange nut, 6 Nm,
12 - seal
Remove hex nuts 10 from the trunk (Fig. 12.5).
Unscrew the bolts of the lower part of the inner wing 9 (Fig. 12.5) and push it to the side.
Unscrew the hex nut 11 located underneath it (Fig. 12.5).
Unscrew bolts 1 (Fig. 12.5) and remove the cross beam from the longitudinal beams.
Remove six spherical head bolts 5 (Fig. 12.5).
Installation
Installation is carried out in the reverse order of removal.
Before installing bumper 6 (Fig. 12.6), insert spacer clamps 13 into side part 14.
