Adjusting and checking the tension of the camshaft drive belt
- 1 - camshaft drive belt tensioner;
- 2, 3 - wrenches;
- 4 - camshaft gear;
- 5 - camshaft drive belt;
- 6 - intermediate shaft gear
Order of execution
1. Turn the water pump counterclockwise, after tightening the belt so that it does not come off the gears. Turn the water pump counterclockwise with a mounting spatula or screwdriver, tightening the belt. Tighten the water pump mounting bolts.
2. Check belt tension. The belt must be twisted no more than 90°with thumb and forefinger.
3. Finally tighten the water pump mounting bolts to 20 Nm (2.0 kgf·m).
Visitor comments