Table of contents: Main headlight bulbs ↓ Parking light bulb ↓
Main headlight bulbs
All headlight bulbs are removed from the engine compartment.
Turn the headlight cover to the left in the engine compartment (counterclockwise) and take it off.
Disconnect the wire tip.
Compress the spring clamps of the lamp and fold them back.
Left: Removing the main headlight bulb (2) after removing the cover (3) and loosening the spring mounting bracket (1).
Right: The constant beam bulb with socket (2) is located under the main headlight bulb on the headlight reflector (1). To remove, press the small clip.
Left: To remove the headlights, you need to unscrew the bolts indicated here by the arrows. The other two mounting bolts are located on top of the upper cross member of the engine compartment.
Right: The Allen keys (arrows) can be used to adjust the position of the headlight when the hood is open. The adjusting screw on the outside of the car adjusts the height of the light beam, the screw on the inside of the car adjusts the lateral offset.
Pull out the incandescent light bulb.
The new headlight bulb should be inserted so that its three contact tabs form an open-side down "P" shape.
Parking light bulb
Preparation is the same as described in the previous section.
Pull the parking light bulb holder out of the reflector. At the same time, slightly press the locking groove.
Lightly press the miniature bulb into the socket, turn it counterclockwise and remove it.