Lamp replacement
Remove bumper panel (next to the fog lights).
Remove the two fixing screws below (see illustration below).
Left: After removing the small panel in the bumper next to the fog lights, the following screws are visible: adjustment screw (white arrow), and tayuke the mounting bolts of the fog lamp housing (black arrows).
Right: to remove the fog lamps, you need to remove them with the fog lamp housing (2). Finally, after loosening both Phillips screws (arrows) remove the back cover (1) headlight housing.
Pull the fog lamp forward, while removing the mounting tabs from the guides in the bumper.
Press the wire clamp and disconnect the plug.
Remove the two Phillips screws and remove the back cover.
Compress the clips for fixing the spring at the lamp mount and fold them out.
Pull out the fog light bulb.
When installing a new incandescent lamp, the lamp socket must fit exactly into the recess in the reflector.
Pay attention when installing: first insert the headlight into the hole in the bumper, and then tighten the two cross-head screws.
Visitor comments