Execution order
1. Loosen the self-locking nuts securing the stabilizer bar to the suspension arms on both sides. Remove the outer plates and cushions.
2. Loosen the mounting bolts and remove the two stabilizer bar cushion clips.
3. Remove the stabilizer bar from the suspension arms by rocking the front suspension and remove the inner plates and cushions from it.
4. Remove the rubber cushions from the stabilizer bar by spreading their ends.
5. Install the anti-roll bar in the reverse order. In this case, replace the self-locking nuts with new ones and tighten them to a torque of 110 N·m (11.0 kgf·m).
[The original article is available on the website «AudiManual.ru»]