Disassembly and assembly
1. Remove the telescopic pole (cm. subsection 8.1.1).
2. Loosen the mounting bolts and remove the brake shield.
3. Using a puller, press the wheel hub out of the bearing in the steering knuckle.
4. Remove one circlip from each side of the steering knuckle.
5. Press wheel bearing out of steering knuckle.
6. Assemble the hub in reverse order. When pressing the bearing onto the hub flange, apply force only to the inner ring of the bearing. Tighten the brake shield mounting bolts to a torque of 10 Nm (1.0 kgf·m). After assembly, install the telescopic pole in place.
Visitor comments