Mounting the lokar
- 1 - screw;
- 2 - washer;
- 3 - plastic nut
Execution order
1. Loosen the wheel mounting bolts.
2. Raise and support the front of the vehicle.
3. Finally loosen the mounting bolts and remove the wheel.
4. Remove the locking screws.
5. Unscrew the two plastic mounting nuts and remove the locking device from the wheel well.
6. Install the locking mechanism in the reverse order. Finally tighten the wheel mounting bolts with the vehicle standing on the ground, evenly to a torque of 110 N·m (11.0 kgf·m).
(The original article is located on the online resource «audimanual.ru»)