Upper Buffer Mount
- 1 - screw;
- 2 - buffer
Order of execution
1. Remove decorative trim (1), by gently prying it out with a screwdriver.
2. Unscrew the five fastening screws and remove the decorative strip by picking up its ends with a screwdriver (1 - decorative strip; 2 - screwdriver).
3. Remove radiator cover (cm. subsection 11.2).
4. Unscrew the two fixing screws and remove the decorative grille.
5. Disconnect the wiring harness from the fog lights.
6. Loosen the upper bumper mounting bolts.
7. Loosen the lower mounting bolts and pull the bumper forward, pulling it out of the side guides.
8. If necessary, remove the carrier plate (1) from buffer (2). Insert the new carrier plate into the buffer and snap the plastic clips into place with great force.
9. Install front buffer in reverse order.
Visitor comments