Front door
- 1 - lock lock button;
- 2 - socket of the internal handle of the door lock;
- 3 - handrail;
- 4 - power window handle;
- 5 - interior upholstery
Withdrawal
1. Remove the interior rear view mirror cover.
2. Release the door lock button.
3. Release the door lock button.
4. Remove the screw plug with a screwdriver and, having unscrewed the fastening screw, remove the socket of the inner handle of the door lock.
5. Remove the handrail trim by prying it with a screwdriver, unscrew the fastening screws and remove the handrail.
6. Remove the power window handle. To do this, press the handle cover down and unscrew the handle fixing screw.
7. Loosen one screw of the side upper fastening on both sides of the upholstery.
8. Unscrew the screw of the central fastening of the upholstery, located under the inner handle.
9. Use a screwdriver to press the caps of the lower fastening and remove the upholstery upwards.
10. If necessary, remove the protective film, having previously removed the three upper clips of its fastening.
Installation
1. Install, if removed, the protective film, securing it on top with caps. Replace damaged film.
2. Install the upholstery and snap in all the lower clips of its fastening.
3. Screw in the screw of the central fastening of the upholstery.
4. Screw in one screw of the side upper fastening on both sides of the upholstery.
5. Install the power window handle.
6. Install the handrail, screw in the screws of its fastening and insert the decorative trim.
7. Install the interior door handle socket.
8. Close the lock button.
9. Install the interior rearview mirror cover.
Visitor comments