1. Disconnect the negative battery cable. Open the back door and support her.
2. Separate electroconducting, vacuum and a washer hose, get electroconducting and hoses from a back door.
3. Remove the locking bracket, remove the holder posts from the rear door ball studs (photo).
4. Note the scheme of hinges of a back door.
5. Turn off four bolts of fastening of a plate of the hinge, remove a back door from the car.
6. Installation is carried out in the reverse order, adjust the position of the hinges of the rear door to ensure equal clearance at the bottom on both sides.
Visitor comments