II 1. Self-locking bolt. 12 Nm; 2. Executive motor of the electric parking and hand brake of the control unit of the electric parking and hand brake of the executive motor; 3. Lip seal. Usually subject to replacement; 4. Self-locking bolt. 35 Nm. Usually subject to replacement. When loosening or tightening, hold the guide bolt; 5. Spacer; 6. Brake hose to brake caliper, 20 Nm. To replace brake pads, do not unscrew the brake drive line. Ensure that the locking tabs are seated correctly in the bracket. Install without over-tightening; 7. Brake caliper housing. To replace the brake pads, do not unscrew the brake hose. It is possible to mount the brake bracket with the brake caliper. Replace; 8. Brake bracket with guide pins and protective cap. Supplied assembled, with plenty of grease on the guide bolts. If the protective caps or guide pins are damaged, install the repair kit. When installing the guide pins, use the supplied tube of grease. It is possible to mount the brake bracket with the brake caliper; 9. Brake pads. Always replace on both wheels of the axle. Check the thickness of the pads. It is possible to mount the brake bracket with the brake caliper. The brake pads must be located between both tongues of the pad support plate to maintain an air gap between the brake disc and the brake pad; 10. Brake pad holder. Replace with each brake pad replacement; 11. Wheel bolts. Install the wheels.; 140 Nm; 12. Bolt. 5 Nm; 13. Brake disc. Always replace on both wheels of the axle; 14. Hexagon socket head cap screws. 10 Nm; 15. Brake safety shield; 16. Bolt. 100 Nm + 90°. Replace; 17. Bolts. 100 Nm + 90°. Replace
[The original article is posted on the resource: AUDImanual.ru]