Disconnect the wire from the bracket -2- by turning the wire to the left -A- and remove the wire. Remove bolts -1- on brake bracket. Remove the brake. caliper with brake pads and brake bracket. Do not hang the brake. the caliper with the brake bracket to the brake hose, and secure it to the body with a suitable cable tie or wire. Brake mass The caliper cannot be loaded with brakes. hose. When the brake caliper is removed, do not press the brake pedal.
Installation
Use new bolts. Apply the brake carefully. caliper with brake bracket and brake pads. disk. Tighten new bolts -1 - securing the brake bracket. Insert brake. hose into bracket -4-. Insert the wire into the bracket -2- and secure the wire by turning it to the right -B-. Install wheels. Lower the vehicle.
Visitor comments