1. Keep the hood open.
2. Disconnect the windshield washer hose, separate the wiring for the engine compartment light (photo). Disconnect the wiring at the connector in the collection chamber.
3. Mark the position of the hinges for easy adjustment during installation.
4. Remove the brackets from the holder, open the top pins (photo) and take them out.
5. Unscrew the four bolts securing the hood hinge, lift the hood from the car (photo).
6. Installation is carried out in the reverse order, adjust the hinges so that the clearance of the edge of the hood is the same. If necessary, adjust the two strike plates at the start of the hood to achieve a satisfactory closing.
Visitor comments